Ssh Commands - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide
The commands in this section are used to Secure Shell (SSH) connections. For
additional information Secure Shell, see
The commands found in this section include:
Command
ssh ?
ssh keygen
ssh list
ssh load privatekey
ssh load publickey
ssh set encryption
ssh set idletimeout
ssh set keepalive
ssh set mac
ssh set rekey
ssh set status
system sshport
®
Efficient Networks
SSH
Table 19-1: SSH Command Listing
List the supported SSH sub-commands.
Generates the Private-Public key-pair for the local
server.
Displays the current SSH configuration with the ex-
ception of the list of public-private key pairs and the
configured SSH port.
Loads a precomputed private-key, from the speci-
fied TFTP server.
Loads a precomputed public-key, from the speci-
fied TFTP server.
Sets the type of encryption the SSH connections
will use.
Sets the idle timeout period for SSH connections.
Enables and disables keepalive messages trans-
mission.
Sets the type of message authentication code use
for SSH connections.
Sets the interval between key re-exchange.
Enables and disables SSH connections.
Manages system SSH port access.
Chapter 19: SSH Commands
CHAPTER 19

SSH COMMANDS

CHAPTER 19
in Chapter 5, System
Function
Security.
Page 19-1