Efficient Networks Router family Command Line Interface Manual page 503

®
SpeedStream Router family
Command Line Interface Guide
Parameters
<policy name>
a
ASCII string, policy name is case-sensitive
Example
Example command using the optional <policy name> parameter to display only
mypolicy3 configuration information.
-> qos list mypolicy3
QoS: On
DiffServ: On
Queue
0
1
2
3
Number of policies : 5
QOS INFORMATION FOR <mypolicy3>
Status................................Enabled Active
Policy number ........................4
Policy hit count .....................0
Source IP ............................Not Specified
Destination IP .......................Not Specified
Source Port...........................181
Destination Port......................181
Bi-Directional........................ON
Incoming CodePoint....................2
Protocol..............................TCP
Outgoing CodePoint....................1
Queue Priority........................LOW
Scheduling............................Always on
Response
See example above.
®
Efficient Networks
a
Optional parameter that will display only the specified policy
name.
Priority Code-Point
HIGH
MEDIUM
NORMAL
LOW
Chapter 20: QoS Commands
Weight
0x4 10
0x3 10
0x2 10
0x1 10
Page 20-7