Efficient Networks Router family Command Line Interface Manual page 73

®
Efficient Networks Router family
Command Line Interface Guide
Command
system backup successrate
system blocknetbiosdefault
system community
system default modem
system delbootpserver
system delhostmapping
system delhttpfilter
system deliproutingtable
system delserver
system delsnmpfilter
system delsyslogfilter
system delsyslogserver
system deltelnetfilter
system deludprelay
system history
system httpport
system list
system log
system modem
system moveiproutingtable
system msg
®
Efficient Networks
Table 4-1: System Command Listing (Cont.)
Changes the minimum success rate required for a
group of pinged addresses.
Sets the default value used when a remote router
entry is defined.
Enables changing the SNMP community name
from its default value.
Lists the default modem settings.
Removes an address from the BootP server list.
Undoes an IP address/host translation (remap-
ping) range
Deletes an http address filter.
Deletes a range of addresses that reference a vir-
tual routing table or deletes the entire virtual rout-
ing table.
Deletes an server entry.
Deletes the SNMP client range.
Renames a file in the file system.
Deletes the Syslog address filter.
Deletes the Telnet client range.
Deletes the UDP port range.
Displays the router's most recent console log.
Manages the system HTTP port access.
Lists the system settings for the target router.
Allows logging of the device's activity in a Telnet
session.
Changes the selected modem setting.
Moves a range of IP addresses to another virtual
routing table.
Sets or changes the message saved in the local
router you are configuring.
Chapter 4: System Commands
Function
Page 4-3