Efficient Networks Router family Command Line Interface Manual page 39

®
Efficient Networks Router family
Command Line Interface Guide
erase
Erases the entire router's configuration or parts of it from FLASH memory.
CAUTION:
You will need to completely reconfigure any part of the configuration that you erase.
NOTE:
An erase command does not take effect until after a
Mgmt Class
Admin (R/W)
Input Format
erase all | keys | dod | sys | eth | filter | ipsec | ike | atom
| sdsl | idsl | frame | dhcp | atm25 | l2tp | sntp
Parameters
***
all
atom
dhcp
dod
eth
filter
keys
sys
Example
# erase dod
®
Efficient Networks
When entered with no parameters, same as erase all.
Erases the entire router configuration from FLASH memory, includ-
ing settings for the system, Ethernet LAN, DSL line, DHCP, and re-
mote router database.
Erases the ATM configuration settings.
Erases the DHCP configuration settings from FLASH memory. To
clear all DHCP information without erasing FLASH memory, use the
command dhcp clear all records (xxx).
Erases the current state of the remote router database.
Erases the configuration settings for the Ethernet LAN from FLASH
memory.
Erases the current bridging filtering database from FLASH memo-
ry.When you issue this command you must reboot (without a save).
Erases the software option keys from FLASH memory.
Erases the name, message, and authentication password system
settings from FLASH memory.
Chapter 2: Status Commands
reboot without a save command.
Page 2-9