Efficient Networks Router family Command Line Interface Manual page 129

®
Efficient Networks Router family
Command Line Interface Guide
Reset:
Escape:
Init:
Off-Hook: ATH1
Dial:
Answer:
Hangup:
=== ETHERNET ===
GLOBAL BRIDGING/ROUTING SETTINGS:
Bridging enabled..................... no
Exchange spanning tree with dest... yes
Bridge only PPPoE with dest........ no
IP Routing enabled................... yes
Multicast forwarding enabled....... no
Firewall filter enabled ........... yes
Directed Broadcasts Allowed........ no
RIP Multicast address.............. default
VRRP Multicast address............. default
IPX Routing enabled.................. no
ETHERNET INFORMATION FOR <ETHERNET/0>
Hardware MAC address................. 00:20:6F:09:0C:25
Send IP RIP to the LAN............... rip-1 compatible
Advertise me as default router..... yes
Process IP RIP packets received...... rip-1 compatible
Receive default route by RIP....... yes
IP address translation............... no
IP filters defined................... yes
IP address/subnet mask............... 192.168.254.254/255.255.255.0
Management IP address/subnet mask.... 0.0.0.0/0.0.0.0
Static Ethernet routes defined....... none
Virtual Ethernet routes defined...... none
IPX External network number.......... 00000000
IPX Frame type....................... 802.2
MTU.................................. default
=== DHCP ===
BOOTP/DHCP Relay address ..... none
bootp tftpserver ............. none
bootp file ................... n/a
®
Efficient Networks
ATZ
+++
ATS0=0Q0V1&C1&D0X4S12=20
ATDT
ATA
ATH0
Chapter 4: System Commands
Page 4-59