Efficient Networks Router family Command Line Interface Manual page 361

®
Efficient Networks Router family
Command Line Interface Guide
Table 12-1: Internet Key Exchange Command Listing (Cont.)
Command
ike peers list
ike peers set address
ike peers set localid
ike peers set localidtype
ike peers set mode
ike peers set peerid
ike peers set peeridtype
ike peers set secret
ike proposals add
ike proposals delete
ike proposals list
ike proposals set dh_group
ike proposals set encryp-
tion
ike proposals set lifetime
ike proposals set
message_auth
ike proposals set
session_auth
ipsec add
ipsec delete
ipsec disable
®
Efficient Networks
Function
Lists the defined IKE peers.
Sets the IP address of the other endpoint of the se-
cure IKE peer connection.
Sets the local ID for the IKE peer connection.
Sets the type of the local ID for the IKE peer con-
nection.
Sets the IKE peer connection mode to either main
mode or aggressive mode.
Sets the peer ID for the IKE peer connection.
Sets the type of the peer ID for the IKE peer con-
nection.
Sets the shared secret for the IKE peer connection.
Defines the name of a new IKE proposal.
Deletes an existing IKE proposal.
Lists the IKE proposals.
Sets the IKE proposal parameter that specifies the
Diffie-Hellman (DH) key generation group used (no
group or group 1 or 2).
Sets the IKE proposal parameter that requests
ESP encryption and specifies the encryption meth-
od used.
Sets the IKE proposal parameter that specifies the
length of time (in seconds) before the Phase 1 Se-
curity Authentication (SA) expires.
Sets the IKE proposal parameter that specifies the
message authentication done.
Sets the IKE proposal parameter that specifies the
session authentication; pre-shared key is currently
the only option.
Defines an IPSec security association (SA) name.
Deletes an existing IPSec security association
(SA) name.
Disables a defined IPSec security association (SA)
entry.
Chapter 12: IKE/IPsec Commands
Page 12-3