Efficient Networks Router family Command Line Interface Manual page 269

®
Efficient Networks Router family
Command Line Interface Guide
Parameters
a
<scr>
<mbs>
<remotename>
a
Integer
b
ASCII string
Examples
The following command disables ATM traffic-shaping remote router HQ.
-> remote setATMTraffic 0 0 HQ
Assuming that the ATM link speed (upstream) is 200 Kb/s 471 cells/s and an average
upstream data rate of 20 Kbps (47 cells/s) is desired, you would issue the following
command:
-> remote setATMtraffic 47 31 HQ
If a constant bit rate (CBR) is required, use the following command:
-> remote setATMtraffic 47 1 HQ
Response
Command prompt.
®
Efficient Networks
Sustained Cell Rate (cells per second).
Maximum Burst Size (cells). For a constant bit rate (CBR), specify
1; for a variable bit rate (VBR), specify a value greater than 1.
b
Name of the remote router.
Chapter 7: WAN Interface Commands
Page 7-9