Efficient Networks Router family Command Line Interface Manual page 294

Chapter 7: WAN Interface Commands
NOTE:
Enter an sdsl save
reboots.
Parameters
***
<speed>
noauto
a
If the auto-speed search is in progress, this command stops the search and sets the line speed as
specified on the command. Auto-speed detection is reinstated if an
is entered.
b
If auto-speed detection is disabled, the Link light on the front panel is amber when the line tries to
activate.
Examples
This command example displays the current line speed, indicates that the line speed
is set by auto-speed detection [AUTO], and lists the available speed options.
-> sdsl speed
SDSL Current Speed: [AUTO] 768 Kb/s
usage: sdsl speed <value in Kb/s> [ 192 384 768 1152 1536 ] | noauto
This command example requests a line speed of 1152 Kb/s.
-> sdsl speed 1152
This command example shows that the line speed has been changed to 1151 Kb/s
and that auto-speed detection is no longer in effect (the [AUTO] indicator is not
displayed).
-> sdsl speed
SDSL Current Speed: 1152 Kb/s
usage: sdsl speed <value in Kb/s> [ 192 384 768 1152 1536 ] | noauto
Response
See examples above.
Page 7-34
or reboot command to save SDSL changes across restarts and
When entered with no parameters, the current speed is displayed.
a
Speed in kbps.
Overrides auto-speed detection.
Efficient Networks
Command Line Interface Guide
b
sdsl speed <speed> command
®
Router family
®
Efficient Networks