Efficient Networks Router family Command Line Interface Manual page 308

Chapter 8: DHCP Commands
Command
dhcp bootp tftpserver
dhcp clear addresses
dhcp clear all records
dhcp clear expire
dhcp clear valueoption
dhcp del
dhcp delrelay
dhcp disable
dhcp enable
dhcp list
dhcp list definedoptions
dhcp list lease
dhcp set addresses
dhcp set expire
dhcp set lease
dhcp set mask
dhcp set otherserver
dhcp set valueoption
Page 8-2
Table 8-1: DHCP Command Listing (Cont.)
Specifies the TFTP server (boot server).
Clears the values from a pool of addresses.
Clears all DHCP information, including all leases
and all global DHCP information.
Releases a client lease.
Clears the value for a global option, for an option
associated with a subnetwork, or with a specific cli-
ent.
Deletes a subnetwork lease, a specific client lease,
or a code.
Removes a single (or all) address from the DHCP
relay list.
Disables a subnetwork or a client lease.
Enables a subnetwork or a client lease.
Lists global, subnetwork, and client lease informa-
tion.
Lists all available predefined and user-defined op-
tions.
Lists the lease time.
Creates or changes a pool of IP addresses that are
associated with a subnetwork.
Allows manual changing of a client lease expiration
time to a certain value.
Controls DHCP lease time.
Changes the mask of a DHCP subnet.
Instructs the router's DHCP server to either contin-
ue or stop sending DHCP requests when another
DHCP server is detected on the LAN.
Sets values for global options, options specific to a
subnetwork, or options specific to a client lease.
Efficient Networks
Command Line Interface Guide
Function
Efficient Networks
®
Router family
®