Efficient Networks Router family Command Line Interface Manual page 124

Chapter 4: System Commands
Parameters
default
disable
a
<port>
a
Integer
Examples
This command sets the SNMP port to the default value (161)
-> system snmpport default
This command disables the existing SNMP port.
-> system snmpport disabled
This command remaps the SNMP port to port 1331.
-> system snmppport 1331
Response
Command prompt.
Page 4-54
Restores the port value to the default value 161 and re-enables the port.
Disables the existing SNMP port.
Defines a new SNMP port number. Use this option to restrict remote ac-
cess.
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®