Gs 8 L P1 P2 P3 P4 M Fn [Parameter] (Specifying Graphics Data) - Citizen CT-S2000 Command Reference Manual

GS ( L pL pH m fn [parameter]
GS 8 L p1 p2 p3 p4 m fn [parameter]
[Function]
[Code]
[Outline]
[Caution]
Specifying graphics data
<1D>H<28>H<4C>H<pL><pH><m><fn>
<1D>H<38>H<4C>H<p1><p2><p3><p4><m><fn>
* In the explanation of function, the code of GS ( L is used.
• GS ( L and GS 8 L ) are the same function.
• When [parameter] exceeds 65533 bytes in each function, GS 8 L is used.
Executes the processing related to the graphics data specified by the function code
(fn).
fn Code
0,48 GS ( L pL pH m fn
2,50 GS ( L pL pH m fn
3,51 GS ( L pL pH m fn
64 GS ( L pL pH m fn d1 d2
65 GS ( L pL pH m fn d1 d2 d3
66 GS ( L pL pH m fn kc1 kc2
GS ( L pL pH m fn a kc1 kc2 b
67 xL xH yL yH [c d1...dk]1...[c
d1...dk]b
69 GS ( L pL pH m fn kc1 kc2 x y
GS ( L pL pH m fn a bx by c xL
112
xH yL yH d1...dk
• pL, pH specifies the number of bytes or "m" and later to (pL + pH  2 56).
• Frequent use of this command may result in damage of NV memory. Use the Write
command to NV memory in consideration of [10 times max./day].
• Following the processing of this command, printer Busy may occur during writing
data in NV memory. While the printer is Busy, it stops receiving process. Therefore,
data transmission (including real-time command) from host is prohibited.
Function
No.
Function48
Function50
Function51
Function64
Function65
Function66
Function67
Function69
Function 12
- 89 -
Function
Sends NV graphics memory
capacity.
Prints graphics data stored in
print buffer.
Sends the remaining amount
of NV graphics memory.
Sends key code list of
defined NV graphics.
Erases all data of NV
graphics in a lump.
Erases the specified NV
graphics data.
Defines raster graphics data
to NV memory.
Prints the specified NV
graphics.
Stores raster graphics data
to print buffer.
