Gs (E Pl Ph Fn Y C1 C2[X D1 - Citizen CT-S300 Command Reference Manual

fn = 8: Function 8 Defining Data by the Column Format to Character
Code Page of Work Area
GS (E pL pH fn y c1 c2[x d1...d(y
[Code] <1d>H<28>H<45>pL pH fn y c1 c2 [x d1..d(yXx)]k
[Range] 5
fn = 8
y = 2 (At selection of font C)
y = 3 (At selection of other than font C)
128
0
0
0
0
k = c2 – c1 + 1
[Outline] Defines the data in column format in units of character on the code page in RAM.
Operates only in printer function setting mode.
(pL + pH 256) 65535
c1 c2 255
x 12 (At selection of font A)
x 9 (At selection of font B)
x 8 (At selection of font C)
d 255
Data structure (9
d1 d4 ............................ d25
d3 d6 ............................ d27
x)]k fn = 8
17)
— 103 —
Bits 6 through 0 are
not character data