Citizen CT-S2000 Command Reference Manual page 181

MSW1-3: Busy condition
[Outline] Select the condition that printer is BUSY. Automatic status send function also runs.
ON (1) OPERATION: If receive buffer is full, printer is BUSY.
OFF (0) OPERATION: If receive buffer is full or off-line, printer is BUSY.
[Additional Description]
Off-line
Buffer full
[Default] OFF (0) [Buffer full/off-line]
MSW1-4： Receive error character
[Outline] Select handling of data detected where the serial communication detects the receive data framing
error, overrun error and parity error.
ON (1) OPERATION: Not printed as "?"
OFF (0) OPERATION: Printed as "?"
[Default] OFF (0) [Print ?]
MSW1-5： CR code
[Outline] Select the printer when receiving CR(<0D>H) code.
ON (1) OPERATION:
OFF (0) OPERATION:
[Default] OFF (0) [Ignored]
Busy Condition
Automatic status send （ASB） function is enabled.
Automatic status send （ASB） function is disabled.
Even if ON is selected, printer enters BUSY status when power is turned on or reset by
I/F or at self test print.
Printer Status
Power-up or reset used by I/F
Self-print
Cover open
Paper-feed by FEED SW
Paper-end (including print stop in PNE)
Error generation
Waiting during macro run by FEED SW
Receive buffer full
Receive Error
CR mode
Select the same operation with LF when receiving CD code.
Print data in print buffer and put linefeeds as specified.
CR code may be ignored with no actions if receiving CR code.
OFF (0)
Buffer full/Off-line
OFF (0)
Print ?
OFF (0)
Ignored
- 179 -
ON (1)
Buffer full
MSW1-3 MSW1-3
OFF ON
● ●
● ●
● ―
● ―
● ―
● ―
● ―
● ●
ON (1)
No Print
ON (1)
LF