Esc & S N M [A [P] S X A] M-N+1 (Defining The Download Characters) - Citizen CT-S2000 Command Reference Manual

ESC & s n m [a [p] s x a] m–n+1
[Function]
[Code]
[Range]
[Outline]
[Caution]
[Default]
[See Also]
[Example]
dot.
[Sample Program]
Defining the download characters
<1B>H<26>H<s>H<n>H<m>H[<a>H<p1>H<p2>··<ps x a>]m – n + 1
s = 3 (Font A, B)
s = 2 (Font C)
32≤n≤m≤126
0≤a≤12 (Font A)
0≤a≤9 (Font B)
0≤a≤8 (Font C)
0≤p1..ps x a≤255
Defines the font of download characters of alphanumeric characters.
• "s" indicates the number of bytes in vertical direction.
• "n" indicates the start character code and "m" the end character code. To define only
one character, set n = m.
• Character codes definable includes 95 ASCII codes in total in the range of <20>H to
<7E>H.
• "a" indicates the number of dots to be defined in horizontal direction.
• "p" is the data to be defined, which indicate a pattern equal to "a" dots in horizontal
direction from the left end. The rest of the pattern on the right side is filled with
space.
• The number of data to be defined is "s x  a ".
• Download characters thus defined remain valid until redefinition, execution of ESC @,
GS *, FS q, GS (A, deletion by ESC ?, or power OFF is performed.
• Download characters and download bit images cannot be defined simultaneously.
• Running this command clears the definition of the download bit image.
Same as the internal character set.
ESC %, ESC ?
p1
p2
24 dots
p3
Create each data bit by setting "1" for a printed dot and "0" for an unprinted
Refer to Sample Program and Print Results for ESC %.
12 dots
p4 ...... p34
p5 ...... p35
p6 ...... p36
Font A
- 19 -
MSB
LSB