Printer Function Setting Commands; Gs ( D Pl Ph M [A1 B1] - Citizen CT-S2000 Command Reference Manual

2.2.14 Printer Function Setting Commands

GS ( D pL pH m [a1 b1] ··· [ak bk]
[Function]
[Code]
[Range]
[Default]
[Outline]
[Default]
Enabling or disabling real-time command
<1d>H<28>H<44>pL pH m [a1 b1] ··· [ak bk]
3≤ (pL + pH x256) ≤65535
m = 20
a = 1
b = 0, 1, 48, 49
a
1 DLE DC4 fn m t(fn = 1): Real-time output of set pulse
Enables/disables the following real-time command processing.
a b
0, 48
1
1, 49
• pL and pH sets the number of bytes on and after m in (pL + pH x256).
• "a" sets the kind of real-time command.
• "b" sets Valid or Invalid.
• When data raw that meets the code configuring real-time command in the image
data, it is recommended that the real-time command be set to invalid by this
command.
a Type of Real-time Command
1 DLE DC4 fn m t (fn=1): Real-time output of pulse specified
Kind of Real-time
Does not process DLE DC4 fn m t (fn = 1). (Invalid)
Processes DLE DC4 fn m t (fn = 1). (Valid)
- 109 -
Command Default
Function
Initial Value
Valid
Valid