Esc = N (Cbm1000 Compatible Mode) (Data Input Control) - Citizen CT-S2000 Command Reference Manual

ESC = n (CBM1000 compatible mode)
[Function]
[Code]
[Range]
[Outline]
[Caution]
[See Also]
Data input control
<1B>H<3D>H<n>
0≤n≤255
• Selecting equipment for which data input from the host is valid.
• Each bit of "n" indicates as follows.
• When the printer has not been selected, this printer abandons all the received data
until it is selected by this command.
Bit
0
1
2
3
4
5
6
7
• Even when the printer has not been selected, it can become BUSY state through
printer operation.
• When the printer is deselected, this printer discards all the data until it is selected
with this command. (Except DLE EOT, DLE ENQ, and DLE DC4)
n = 1
Equipment
Printer
Not defined
Not defined
Not defined
Not defined
Not defined
Not defined
Not defined
- 140 -
Value
0 1
Invalid Valid
— —
— —
— —
— —
— —
— —
— —