Gs ^ N1 N2 N3 (Executing The Macro) - Citizen CT-S2000 Command Reference Manual

GS ^ n1 n2 n3
[Function]
[Code]
[Range]
[Outline]
[Caution]
[See Also]
[Sample Program]
Executing the macro
<1D>H<5E>H<n1><n2><n3>
0≤n1≤255
0≤n2≤255
0≤n3≤1
Executing contents defined in macro.
n1 : The number of times of macro execution
n2 : Waiting time on macro execution: Waiting time of n2 x 100 msec is given for every
execution.
n3 : Macro execution mode
n3 = 0 Continuous execution: The Macro is executed "n1" times continuously at the
n3 = 1 Execution by FEED Switch: After waiting for the time specified by "n2", the
• When this command is received while in macro definition, suspension of macro
definition is indicated. At this time, the defined content is cleared.
• No execution takes place when the macro is held undefined.
• While in macro execution with n3 = 1, paper feed with the FEED switch is not
available.
GS :
Refer to Sample Program and Print Results for GS:.
time interval specified by "n2".
ARARM
LED flickers and the FEED switch is waiting to be
pressed. When it is pressed, the macro is executed
once. This action is repeated "n1" times.
- 68 -