ESC = n (CBM1000 non-compatible mode)
[Function]
[Code]
[Range]
[Outline]
[Caution]
[See Also]
Data input control
<1B>H<3D>H<n>
1≤n≤3
• Selecting equipment for which data input from the host is valid.
• Each bit of "n" indicates as follows.
• When the printer has not been selected, this printer abandons all the received data
until it is selected by this command.
n
1
Specifies printer only.
2
Specifies customer display only.
3
Specifies printer and customer display
• Even when the printer has not been selected, it can become BUSY state through
printer operation.
• When the printer is deselected, this printer discards all the data until it is selected
with this command. (Except DLE EOT, DLE ENQ, and DLE DC4)
n = 1
Function
- 141 -