Dle Dc4 Fn D1 - Citizen CT-S2000 Command Reference Manual

DLE DC4 fn d1...d7 (Specification of fn = 8)
[Function]
[Code]
[Range]
[Outline]
[Caution]
[See Also]
Buffer clear
<10>H<14>H<fn><d1> ...<d7>
fn = 8, d1 = 1, d2 = 3, d3 = 20, d4 = 1, d5 = 6, d6 = 2, d7 = 8
• Erases all data in receiving buffer or print buffer.
• Sends the following 3-byte data group.
Header
Identifier
NULL
• Enters the state of selecting STANDARD MODE.
• When receiving a code row coinciding with the code configuring this command, the
same operation as this command takes place and attention by the user is required.
Example: When corresponding code row is present in bit image data.
• This command must not be used between other command code rows.
Example: This command is used in bit image data.
• This command is ignored during transmission of block data.
ESC p
Hex.
37H
25H
00H
- 139 -
Decimal No. of Data
55
37
0
1 byte
1 byte
1 byte