Other Commands; Dle Enq N (Real-Time Request To Printer) - Citizen CT-S2000 Command Reference Manual

2.2.15 Other Commands

DLE ENQ n
[Function]
[Code]
[Range]
[Outline]
"n".
[Caution]
[See Also]
Real-time request to printer
<10>H<05>H<n>
0≤n≤2
The printer responds in real-time to the request that the host specifies with number
n
At the setting of execution of GS ^ by the FEED switch, the same processing
0
as that pressing the FEED switch once is carried out.
After recovering from an error, the printer resumes printing from the
1
beginning of the line where the error occurred.
The printer clears the receive buffer and the print buffer, and then recovers
2
from the error.
• (n = 1) or (n = 2) shall be used after removing the error.
• When receiving a code row coinciding with the code configuring this command, the
same operation as this command takes place and attention by the user is required.
Example: When corresponding code row is present in bit image data.
• This command must not be used between other command code rows.
Example: This command is used in the bit image data.
• This command is ignored during transmission of block data.
DLE EOT
Function
- 137 -