Citizen CT-S2000 Command Reference Manual page 115

• Setting memory switch 2 (a = 2)
n b (Set Value)
1 49 (Default)
48
2
49 (Default)
48 (Default)
3
49
48 (Default)
4
49
48 (Default)
5
49
6 48 (Default)
7 48 (Default)
48 (Default)
8
49
• Setting memory switch 3 (a = 3)
n b (Set Value)
48 (Default)
1
49
2 48 (Default)
48 (Default)
3
49
4 48 (Default)
5 48 (Default)
6 48 (Default)
48
7
49 (Default)
48 (Default)
8
49
Reserved
Disables auto cutter.
Enables auto cutter.
Enables stored printing.
Disables stored printing.
Immediately after digit reaches full, line-feed is taken.
Immediately after digit reaches full, data wait is taken.
After cover close and PE recovery, prints as it is.
After cover close and PE recovery, prints from the beginning
using PAGE MODE, barcode, image, double-height printing,
etc. as a unit.
Reserved
Reserved
Enables PNE.
Disables PNE.
After clearing cutter error, can be restored by Feed SW.
After clearing cutter error, cannot be restored by Feed SW.
Reserved
Resets with parallel pin 31.
Does not reset with parallel pin 31.
Reserved
Reserved
Undefined
Sets CBM1000-noncompatible mode.
Sets CBM11000-compatible mode.
Sets cover open error during printing to be auto recovery
error.
Sets cover open error during printing to be recoverable error.
- 113 -
Function
Function