Citizen CT-S2000 Command Reference Manual page 102

[See Also]
dots
[Example]
• The maximum definition area of this printer is 2M bits (256K bytes). Multiple NV bit
images can be defined, but bit images of which total size (Bit image data + Header)
exceeds 2M bits (256K bytes) can not be defined.
• The printer state will change to BUSY just before the writing operation into the
non-volatile memory begins. Also, for a printer that have a dip switch [BUSY], the
printer state will change to BUSY just before the writing operation begins regardless
of the state of the dip switch.
• While this command is being executed, it is not possible to send ASB status or to
detect the printer status even when the ASB function is selected.
• If this command is sent while a macro is still being defined, the definition process will
be stopped and the execution of this command will start.
• NV bit images that are defined already are not initialized by using ESC @ command,
or by resetting the printer or turning the power off.
• The command only executes definition of NV bit image, but not start printing. The
printing of NV bit image will be executed by FS p.
• Because frequent writing in the non-volatile memory can destroy the memory, the
writing command should be used less than 10 times a day.
• Just after the completion of the writing operation into the non-volatile memory, the
printer hardware will be reset. Therefore, download characters, download bit images,
and macro definition will be made undefined. The receiving buffer/printer buffer will
be cleared, and each setting will go back to its default value. Then the status of dip
switches will be checked once more.
• It may happen that the printer becomes BUSY during the process of writing data into
the non-volatile memory in the execution of this command. When the printer
becomes BUSY, it will stop receiving data. Therefore, sending data from the host
(including real time command) is prohibited.
FS p
(xL + xH x256) x8 dots = 512 dots
d97
d1
d2
d3
d96
When xL = 64, xH = 0, yL = 96, yH = 0
d49057
MSB
LSB
d49152
- 100 -
(yL + yH x256) x8 dots = 768