Gs G 0 M Nl Nh (Initializing Maintenance Counter) - Citizen CT-S2000 Command Reference Manual

GS g 0 m nL nH
[Function]
[Code]
[Range]
[Outline]
Hexadecima
[Caution]
Initializing maintenance counter
<1D>H<67>H<30>H<m><nL><nH>
m=0
20≦(nL+nH×256)≦70(nL=20、21、50、70、nH=0)
Set the value of resettable maintenance counter specified to 0.
nL, nH are used to set the maintenance counter number to (nL+nH×256).
Counter Number
Decimal
l
14 20
15 21
32 50
46 70
• This command, if used frequently, may destroy NV memory, thus write command to
NV memory shall be used less than ［10 times/day］ as a guideline.
• Along with processing this command, during data-writing to NV memory, printer
BUSY may occur. During the printer BUSY, to stop receive processing, this printer
prohibits the data sending (including real-time command) from host.
Counter ［Unit］
Paper-feed line［line］
Head powering count ［times］
Auto-cutter drive count ［times］
Product operation time［hours］
- 96 -