Table of Contents
Advertisement
5.2 Confirming BIOS settings
Before installing an operating system, ensure that all system components are
correctly detected in the BIOS and that the settings are correct for those devices.
To check the settings:
1. At System Boot up press F1 to enter the BIOS Configuration/Setup Utility
window, shown in Figure 5-2.
Figure 5-2 BIOS Configuration/Setup Utility window
2. Select System Summary to open the System Summary window shown in
Figure 5-3.
Figure 5-3 System Summary window
254
Planning, Installing, and Managing the IBM System x3950 M2
Advertisement
Table of Contents
