Ping Test; Advanced Setup: Dhcp; Change Scsi Settings; Select Console - IBM BladeCenter QS22 Installation And User Manual

Ping Test

This enables you to verify the static IP addresses you have set.
Type 1 to ping each IP address in turn.

Advanced Setup: DHCP

You do not need to use this option unless your network requires a specific block
size or filename.

Change SCSI Settings

At present the QS22 does not support SCSI so this option is not available.

Select Console

You do not have to use this option as, by default, the current session is the active
session, and QS22 does not support more than one session.
PowerPC Firmware
Version QD0123000
SLOF-SMS 1.1 (c) Copyright IBM Corp. 2007 All rights reserved.
--------------------------------------------------------------------------------
Ping Test
NET /axon@10000000000/plb5/plb4/pcix@4000004600000000/ethernet@1
Speed, Duplex: auto, auto
Client IP Address
Server IP Address
Gateway IP Address
Subnet Mask
Protocol: Standard
Spanning Tree Enabled: No
Connector Type:
1. Execute Ping Test
--------------------------------------------------------------------------------
Navigation Keys:
M = return to Main Menu
ESC key = return to previous screen
--------------------------------------------------------------------------------
Type menu item number and press Enter or select Navigation key :
PowerPC Firmware
Version QD0123000
SLOF-SMS 1.1 (c) Copyright IBM Corp. 2007 All rights reserved.
--------------------------------------------------------------------------------
Advanced Setup: DHCP
NET /axon@10000000000/plb5/plb4/pcix@4000004600000000/ethernet@1
1. DHCP Retries: 255
2. TFTP Blocksize: 512
3. TFTP Retries: 5
4. TFTP Filename:
--------------------------------------------------------------------------------
Navigation Keys:
M = return to Main Menu
ESC key = return to previous screen
--------------------------------------------------------------------------------
Type menu item number and press Enter or select Navigation key :
[000.000.000.000]
[000.000.000.000]
[000.000.000.000]
[255.255.255.000]
X = eXit System Management Services
X = eXit System Management Services
Appendix A. Using the SMS utility
73