Table of Contents
Advertisement
Figure 3-30 EXP3000 storage expansion unit
You can attach the EXP3000 storage expansion unit to the SAS controllers
described in the following sections:
3.3.3, "ServeRAID-MR10k RAID controller" on page 128,
3.3.4, "ServeRAID-MR10M SAS/SATA II controller" on page 135
Table 3-15 lists the hard disk drive options.
Table 3-15 EXP3000: hard disk drive options
Part number
39M4558
43W7580
43W7630
40K1043
40K1044
43X0802
The EXP3000 machine type 1727-01X is available and shipped in the following
configurations:
Dual hot-swap redundant power supplies and two rack power cables
No disk; add up to 12 SAS, SATA or SATA II 3.5-inch hard disk drives
One ESM board (2 SAS ports); a second ESM is required for attachment to
dual controller models of DS3200/DS3400
Description
500 GB 3.5-inch hot-swap SATA II
750 GB 3.5-inch hot-swap SATA dual port
1 TB 3.5-inch hot-swap SATA dual port, 7200 RPM
73 GB 3.5-inch hot-swap SAS, 15000 RPM
146 GB 3.5-inch hot-swap SAS, 15000 RPM
300 GB 3.5-inch hot-swap SAS, 15000 RPM
Chapter 3. Hardware configuration
143
Advertisement
Table of Contents
