Table of Contents
Advertisement
Figure 3-40 SAS HDD update
not
Note: Do
power down the system or drive enclosures.
5. After the update is completed, reboot your server.
6. If all updates are complete, go to section 3.4, "Configuring RAID volumes" on
page 154.
Updating the EXP3000
We used the steps in this section to update the ESM in the attached EXP3000.
We recommend also updating the EXP3000. At the time of writing, the latest
update contained a critical fix for the ESM, which fixed the problem of an
unexpected reboot of the EXP3000.
To update the EXP3000:
1. Download the bootable CD image from the following Web address:
http://www.ibm.com/support/docview.wss?uid=psg1MIGR-5073877
2. Burn a CD or mount the ISO image in the Remote Supervisor Adapter II
remote drive of the Web interface as described in 6.2.4, "Remote console and
media" on page 324.
3. Boot your server from this CD image.
Chapter 3. Hardware configuration
153
Advertisement
Table of Contents
