Table of Contents
Advertisement
2. Start the executable package and create two diskettes (the first is bootable)
by selecting of Extract to Floppy as shown in Figure 3-34.
Figure 3-34 LSI1078 code package extraction
3. Boot the server with disk 1 and insert disk 2 when prompted. The utility
attempts to flash the onboard LSI 1078 controllers in you system. You might
see warning messages stating that this flash is not compatible with all
controllers, as shown in Figure 3-35. These are not error messages.
****************************************
*
*
SAS Firmware & BIOS Flash Disk
*
****************************************
NOTE: This utility will scan all LSI 1064, 1068, and 1078 based
controllers in the system. Only the controllers which match
the update type will be flashed.
.
Do you wan to continue[Y,N]?_
Figure 3-35 LSI1078: update process
4. Press Y to start the flash process. See Figure 3-35.
*
*
*
Chapter 3. Hardware configuration
149
Advertisement
Table of Contents
