Microsoft IPMI driver in Windows Server 2003
The Microsoft IPMI driver is not installed by default, however, it is available for
manual installation if you have applied Release 2 Service Pack 2, as follows:
1. Click Start → Settings → Control Panel → Add or Remove Programs →
Add/Remove Windows Components. The window shown in Figure 6-9
opens.
Figure 6-9 Windows Server 2003: adding or removing Windows components
2. Select Management and Monitoring Tools and click Details. The window
shown in Figure 6-10 on page 313 opens.
3. Add a check mark to Hardware Management.
312
Planning, Installing, and Managing the IBM System x3950 M2