Figure 6-6 OSA IPMI driver in a Windows installation
3. Click Next to continue the installation. When it completes, you are prompted
to reboot the server, the installer does not do this automatically.
4. After the reboot open Device Manager again. Enable Show hidden devices
in the submenu View. The ISMP device driver is listed in the section System
devices as shown in Figure 6-7.
Figure 6-7 Device Manager showing list of system devices
OSA IPMI mapping layer (library) files in Windows Server 2003
To install the IPMI mapping layer (library) files:
1. Ensure that the OSA IPMI device driver is installed before installing the library
software.
2. Download the executable file from the link listed in "Download the BMC device
drivers" on page 308, and run it.
310
Planning, Installing, and Managing the IBM System x3950 M2