Table of Contents
Advertisement
Figure 3-27 x3850 M2 and x3950 M2: PCIe slots
5. Remove the screw for the non hot-plugable slot, or push the orange adapter
retention latch toward the rear of the server at the hot-plug, and open the tab.
That is where you add a PCIe adapter. The power LED for slot 6 and slot 7
turn off.
6. Insert the controller in a PCIe slot as shown in Figure 3-28 on page 141
140
Planning, Installing, and Managing the IBM System x3950 M2
Advertisement
Table of Contents
