Table of Contents
Advertisement
Figure 5-6 Processor L2 Cache Sizes
5. In the System Summary window (Figure 5-7), check that all memory
installed is visible to the server, as expected.
Figure 5-7 Memory Installed, detailed in System Summary
6. Check that the memory cards installed in the server are detected as shown in
the Memory Settings window (Figure 5-8), which also shows memory array,
scrub on every boot, and the scrub rate at run time. (To open the Memory
Settings window, select Advanced Setup in the Configuration/Setup Utility
window, shown in Figure 5-2 on page 254.)
Figure 5-8 Detected memory cards in the primary node
256
Planning, Installing, and Managing the IBM System x3950 M2
Advertisement
Table of Contents
