Table of Contents
Advertisement
In the next steps, you check the system BIOS to ensure all processors,
memory cards and capacity, and PCIe adapters installed on the x3850 M2,
x3950 M2, or both nodes are correctly detected.
3. From the System Summary window, select Processor Summary → CPUIDs
(Figure 5-4) and check that all processors on stand-alone or merged nodes
are detected as expected.
Figure 5-4 CPUIDs on a two-node x3950 M2
4. From the System Summary window, select Processor Summary →
Processor Speeds (Figure 5-5) to ensure that all processors are matched,
and check L2 Cache Sizes (Figure 5-6 on page 256).
Figure 5-5 Processor Speeds on a two-node x3950 M2
255
Chapter 5. Installation
Advertisement
Table of Contents
