Brady Tagus User Manual page 90

Step Operator Action
17 After all entries have been made,
press the
the menu and then press the
Key to save the settings
and return to the Ready Mode.
Note:f the Advanced Entry Calibration fails, try the following procedure.
- Re-enter Media Settings / Calibration / Advanced Entry / Sensor Gain and lower
the selected Gain Setting number by one (to make the sensor less sensitive).
- Select the new Gain Setting, save the changes, exit the menu, and then test your media.
- Repeat the procedure until a usable media setting is obtained.
5-44 Rev A
Key to back out of
SAVE CHANGES?
ENTER KEY = YES
Displayed Message Comment
From 'Ready', press the FEED
Key to advance to the next label
TOF.
Quick Test Mode