Brady Tagus User Manual page 148

C.3 Configuration Using a Static IP Address
Once the Ethernet Print Sever has been installed, p
the Ethernet cable, then turn the printer's power switch 'On'.
1. Verify the printer is in the 'Ready Mode'
MENU
2. Press the
FWD
3. Using the
'COMMUNICATIONS'
4. Using the FWD
press the
5. Using the FWD
and press the
FWD
6. Using the
press the
7. Press the
ADAPTER' menu level. Then use the
scroll to
'IP ADDRESS'
C-4 Rev A
button to enter the printer's menu.
button scroll to
and press the
button scroll to
'NIC ADAPTER'
button.
button scroll to
'IP DISCOVERY'
button.
button scroll to 'DISABLED'
button.
button once to return to the
and press the
lug in the power cord, but do not connect
button.
and
and
'NIC
FWD
button
button.
Optional Internal Ethernet Printer Driver
WED 10:16A 02J
UL 2007
READY
MENU MODE
MEDIA SETTINGS
MENU MODE
COMMUNICATIONS
COMMUNICATIONS
ADAPTER
NIC ADAPTER
IP DISCOVERY
IP DISCOVERY
*DISCOVERED
NIC ADAPTER
IP ADDRESS