Printer Options - Brady Tagus User Manual

5.2.4

Printer Options

MODULES
PRINT DIRECTORY
PRINT FILE
FORMAT MODULE
DELETE FILE
PACK MODULE
PRESENT SENSOR
MODE
AUTO
ENABLED
DISABLED
RETRACTION DELAY
070 x 10mS
CUTTER
AUTO
ENABLED
DISABLED
The Menu System
Memory available for user storage of graphics, fonts and label formats.
(The physical presence of the respective memory module must be
detected to show the function selections in the menu system.
Prints a label directory of selected, or of all available modules, the
available space on these modules, the files present, and the type of
module and files.
The user may select from a list of available files for sample printing.
The user may select from a list of available modules for formatting – all
data will be erased.
The user may select from a list of available files for deleting (protected
modules will not appear). Bytes will not be retrieved until the module
that contained the deleted file is packed.
Packing the module removes files marked as deleted and defragments
existing file structures to recover space.
Used for on-demand label dispensing, where a printed label blocking
the sensor will inhibit further printing until removed. (The physical
presence of the Present Sensor must be detected to show the
ENABLE/DISABLE selections, else NOT INSTALLED will be displayed
momentarily).
Sets Present Sensor to desired mode of operation.
Enables the present sensor when option is installed – present sensor
or peel and present mechanism. Stop location (present distance is
automatically set appropriately for the installed hardware.
Enables the sensor for on-demand printing. Stop location (present
distance is automatically set appropriately for the installed hardware.
Disables the sensor.
Time delay prior to moving label to next start of print in milliseconds.
(1-255)
Used to cut media into separate labels. (The physical presence of a
device must be detected to show the ENABLE/DISABLE selections,
else NOT INSTALLED will be displayed momentarily).
Enables the cutter when option is installed. Stop location (present
distance is automatically set appropriately for the installed hardware.
Enables cutting.
Disables cutting.
5-11 Rev A