Display Printers - Brady Tagus User Manual

7.3.2

Display Printers

To print the Hex Dump Label:
1. To begin, go to the Diagnostics menu and enable Hex Dump Mode; see Section 5.1.7.
2. Exit the menu and save the changes. 'HEX DUMP MODE' will be indicated by the display
and all data sent to the printer will now be output in hexadecimal code, along with the
printable ASCII equivalents, as shown below.
Note: The figure below is a sample Hex Dump Label. After sending a label
format to the printer, the hex code output will be immediate. As a final note, many
software programs use bit mapping to construct the label, making diagnosis
difficult. Contact Brady Technical Support with any questions.
Note: To return to Ready Mode, re-enter the Diagnostics Menu and disable the
Hex Dump Mode, exit the menu, then save the changes.
Hex Dump Mode 7-11 Rev A