Brady Tagus User Manual page 105

4. If image is skewed, check the following:
• Media: Labels are loaded with the inner edge of the media against the inside wall of the
printer. Position the green media edge guide against the outer edge of the media so that it
touches the liner but does not folder it over.
• Skew: Media is straight (parallel to the print head) when locking the print head into
position.
Cam position: Set to center position.
•
Print Head Pressure: Set to the minimum amount required to achieve an acceptable
•
image (See
Print Head Leveling Adjustment
Section 6.6: Printhead Pressure Adjustment
).
6-15 Rev A