Brady Tagus User Manual page 169

To save a manually entered setup (for example, an application that required an Advanced Entry
Calibration before beginning) as a configuration file using the front panel:
Displayed
Step Message
1
READY
2
MENU MODE
MEDIA SETTING
3
MENU MODE
SYSTEM SETTINGS
4
SYSTEM SETTINGS
CONFIGURATION
FILE
5
CONFIGURATION FILE
RESTORE AS CURRENT
6
CONFIGURATION FILE
SAVE SETTINGS AS
7
SAVE SETTINSG AS 1
8
SAVE SETTINGS AS
SPECIAL 1
9
SPECIAL STOCK
SUCCESSFUL
Saving a Configuration File (printers with display only)
Operator Action
MENU
Press the Key.
FWD
Use the Key to
scroll to 'System Settings'.
Press the Key to
select 'System Settings'.
Press the Key to
select 'Configuration File'.
FWD
Press the Key to
scroll to 'Save Setting As'.
Press the Key.
Enter a file name using the
REV
Key to scroll
through the characters.
Note: To change an accepted character, select the delete
function (solid flashing block) and press ENTER.
Use the Key to
accept the character.
Note: To abort the "save setting" function, delete all entered
characters in the file name and press the ESCAPE Key.
Press the Key
repeatedly to save the file
name and return to
'Ready'.
Comment(s)
You are entering 'Menu Mode'.
REV
The Key can also be used.
You are entering the 'System Settings'
menu.
You are entering the 'Configuration
File' submenu.
REV
The Key can also be used.
Press the Key to exit this
selection.
FWD
The Key can also be used.
Continue entering the file name in this
mannaer ("SPECIAL STOCK" has been
used as an example).
Save complete. (To restore a saved
file using the front panel see Section
5.1.5.)
E-3 Rev A