Brady Tagus User Manual page 68

Communications (continued)
CONTROL CODES
STANDARD CODES
ALTERNATE CODES
ALTERNATE CODES 2
CUSTOM CODES
FEEDBACK CHARACTERS
ENABLED
DISABLED
ESC SEQUENCES
ENABLED
DISABLED
HEAT COMMAND
ENABLED
DISABLED
SPEED COMMANDS
ENABLED
DISABLED
TOF SENSING COMMANDS
ENABLED
DISABLED
5-22 Rev A
Allows the operator to change the prefix of the software commands
interpreted by the printer.
Hex 01 = SOH command; Hex 02 = STX command; count-by = ^; Hex
1B = ESC; Hex 0x0D = Carriage Return
Hex 5E = SOH command; Hex 7E = STX command; count-by = @;
Hex 1B = ESC; Hex 0x0D = Carriage Return
Hex 5E = SOH command; Hex 7E = STX command; count-by = @;
Hex 1B = ESC; Hex 0x7C = Carriage Return
Each DPL command (SOH, STX, CR, and count-by) may be selected
by entering the desired Hex code. (The
characters, while the ENTER Key selects character and then
advances the cursor.)
Returns a Hex 1E, [RS], after each label successfully prints, and a Hex
1F, [US], after each batch of labels is printed.
Feedback characters are sent to the host.
No feedback characters are sent.
Allows data containing invalid ESC control code sequences to be
processed, helpful because some systems send a "banner" to the
printer.
Normal printer operating mode.
ESC sequences are ignored and the data is processed. Bitmapped font
downloads are disabled in this mode.
Allows the user to disable the DPL Heat Command, providing
compatibility with other BRADY printers.
Normal printer operating mode.
DPL Heat commands are ignored. The heat value is controlled via the
menu setting; see Section 5.1.3.
Allows the user to disable the DPL speed commands (Print, Feed, Slew,
and Reverse).
Normal printer operating mode.
DPL speed commands are ignored. The speeds are controlled via the
menu setting; see Section 5.1.3.
Allows the user to disable the DPL Top of Form commands (Gap,
Continuous, and Reflective).
Normal printer operating mode.
DPL TOF commands are ignored. The TOF is controlled via the menu
setting; see Section 5.1.2.
and Keys will scroll the
The Menu System