Brady Tagus User Manual page 62

System Settings (continued)
PEEL MODE
ENABLED
DISABLED
♦
SECURITY
SELECT SECURITY
MENU AND TEST
SECURE MENU
DISABLED
MODIFY PASSWORD
UNITS OF MEASURE
IMPERIAL
METRIC
INPUT MODE ♦
DPL
LINE
5-16 Rev A
Specifies that a Feed operation be prevented when the label is
presented and not removed, or if the printer is to wait for the GPIO
start of print signal.
Feed is inhibited according to the above criteria.
Feed is always enabled.
Provides the user with the ability to password-protect all settings
available through the User Interface. Default password is: 1 2 3 4
Enable or disable the security feature of the User Interface.
The Menu and Test areas will require a password before access is
granted.
The Menu area will require a password before access is granted.
All menu items are accessible without protection.
Modify the numeric password required to access the menu system
when security is enabled.
Selects the measurement system in which the system's settings are
represented in the menu system and on configuration labels.
Inch standard: lengths and counters given in inches.
Metric standard: lengths given in millimeters and counters in
centimeters.
Defines the type of printer language.
Standard DPL processing.
Standard DPL processing with addition Line mode Template
processing enabled. Line Mode exacts data terminated by a carriage
return to be inserted in a DPL template and printed.
The Menu System