Commands Applicable Only To Spm - AT&T MERLIN LEGEND Installation & Maintenance Manual

Programming Procedures
Table 4-5

Commands Applicable Only to SPM

Function
To activate the SPM Help option
To reset the SPM program (return to SPM main
menu and drop the connection with the control
unit). Use reset when invalid characters
appear on the screen. If programming from a remote
location, the call to the system must be re-
established.
Note: Do not use reset while performing a Restore
procedure. This will cause corruption of system
programming information.
4-10 System Programming
Command
PC
Ctrl+F1
Ctrl+F5