AT&T MERLIN LEGEND Installation & Maintenance Manual page 299

Programming Procedures
Step
3. Select the specific tie
trunks associated with the
20 line buttons on the
console or SPM screen
For logical IDs 1–20
For logical IDs 21–40
For logical IDs 41–60
For logical IDs 61–80
4. Specify dial mode
For touch-tone dial
mode
For rotary dial mode
Note: An alternate method for steps 3 and 4 is to select Entry
Mode (F6), identify the tie trunk (dial or type trunk number,
logical ID, or slot and port no.), and select Enter (F10) to assign
touch-tone, or select Delete (F8) to assign rotary dial.
5. Exit
Console PC
Lines 01-20
Lines 21-40
Lines 41-60
Lines 61-80
Press function
Press line
key for each tie
button for each
tie trunk to turn trunk to make
letter "G"
green LED on
appear on
screen
Press line Press function
button for each key next to
rotary tie trunk each rotary tie
to turn green trunk to erase
LED Off letter "G"
Exit
F 5
Exit F 5
F 5
Exit
Tie Trunks
F1
F2
F3
F4
4-57