AT&T MERLIN LEGEND Installation & Maintenance Manual page 322

Programming Procedures
Telephone Number to Send
Note: You can use the Copy Telephone Number to Telephone
Number to Send procedure instead of this procedure to specify
that the Telephone Number to Send should be copied from the
Telephone Number assigned to each channel in the B-Channel
group.
Step
1. Display PRI screen and
select Phone Number to
Send
2. Identify line/trunk and
save entry
If you are programming
more than one line/trunk,
enter lowest number.
3. Assign telephone number
to line (up to 12 digits, any
combination of 0 and 9)
4. Save entry and either
program another PRI
line/trunk or exit
To save entry and
assign telephone
number to send to
another PRI line/trunk:
If next line/trunk
number is sequential
Continued
4-80 PRI Facilities
Console
LinesTunnks
PRI
NumbrToSend
Dial line/trunk
no. (801-880)
or # + Iogical ID
Enter
Dial telephone
number: [nnn number: [nnn
nnnnnnnnn]
Next
Repeat step 3
PC
F 4
F 6
F 3
Type line/trunk
no. (801-880),
or # + logical ID
F10
Type telephone
nnnnnnnnn]
F 9
Repeat step 3