AT&T MERLIN LEGEND Installation & Maintenance Manual page 240

Installation
Test Music-on-Hold
Follow these steps to verify that music is provided to outside
callers placed on hold. Inside callers do not receive Music-on-
Hold (MOH).
1.
Pickup the handset at the test telephone. Dial the CO
line/trunk access code and the system's listed directory
number, or if you are using the DID trunk, dial any station.
2. At the called station, answer the incoming call.
3.
At the called station, press Hold.
The line button's green LED should flash.
4.
Verify that music is heard at the calling telephone.
5.
Hang up.
Note: If you use equipment that rebroadcasts music or other
copyrighted materials, you may be required to obtain a copyright
license and pay license fees from a third party such as the
American Society of Composers, Artists, and Producers (ASCAP)
or Broadcast Music Incorporated (BMI). Or you can purchase a
Magic on Hold
such a license, from AT&T or your authorized representative.
Test the PFT Jacks
To test a power failure transfer (PFT) jack for proper operation,
the outside line numbers to the module's line/trunk jacks must be
assigned and the lines/trunks must be operational. Also, a PFT
telephone on a GS line must have a GS button (see Figure 66)
attached to the telephone. Follow these steps to test the PFT
jacks:
1. Plug a touch-tone or rotary dial telephone into a PFT jack.
System Acceptance Test
3-132
®
system, which does not require you to obtain