AT&T MERLIN LEGEND Installation & Maintenance Manual page 281

Programming Procedures
Step
2. Identify Pool to program
and save entry
3. Select specific trunks
associated with the 20 line
buttons on console or
SPM screen
For logical IDs 1–20
For logical IDs 21–40
For logical IDs 41–60
For logical IDs 61–80
4. Assign or remove trunks
from pool
To assign trunks to
pool
To remove trunks from
pool
Note: An alternate method for steps 3 and 4 is to select Entry
Mode (F6), identify the line/trunk (dial or type line/trunk number,
logical ID, or slot and port no.), and select Enter (F10) to assign
the trunk to a pool, or select Delete (F8) to remove the trunk from
the pool.
PC
Console
Type pool dial-
Dial pool dial-
out code:
out code:
[nnnn]
[nnnn]
F10
Enter
F1
Lines 01-20
F2
Lines 21-40
F3
Lines 41-60
F4
Lines 61-80
Press function
Press line
button for each key for each
trunk to turn red trunk to make
letter "R"
LED on
appear on
screen
Press function
Press line
key for each
button for each
trunk to turn red trunk to erase
LED Off
Lines and Trunks
letter "R"
4-39