AT&T MERLIN LEGEND Installation & Maintenance Manual page 497

Maintenance and Troubleshooting
Oxaaaaaaaa
aa
Backspace
A
c
E
Slot 00 System Erase:
System will be down
Do you want to continue?
Yes
No
Exit
System Erase:
Full-default Restarting
Restore
You must restore a module after a demand test has been run
and after a module has been replaced.
Slot xx:
Make a selection
Status
Busy-Out
Restore
Exit
Enter data:
Hex
Enter
Exit
B
D
F
Demand Test
Reset
This screen appears and
you can enter any changes
you want to make. Press
"Enter" when you are done.
If you selected "System
Erase," this screen appears.
Choose "Yes" or "No."
Remember that "System
Erase" wipes out the
system's memory.
If you chose to continue
with "System Erase," this
screen appears.
After entering the slot
number for the module, this
screen appears.
"Restore."
Maintenance 5-19
Choose