Modem Option Setting For Digital-To-Analog Modem Pool Operation - AT&T MERLIN LEGEND Installation & Maintenance Manual

Installation
7. Unplug the modem from the wall outlet; then plug it back in.
Set switch 1, bit 2 to the left. This stores the switch settings in
the modem's memory, and the modem is now operating in the
AT command protocol.
Table 3-29 Modem Option Setting for Digital-to-Analog
Modem Pool Operation
Switch
1
2
3
4
5
7
L = left, R = right, U = up, D = down
8. Enter command mode, set the options, and save the options
into protected memory to prevent loss of settings in case of a
power failure:
Type "AT" and press Enter to enter the local mode.
Type "AT&D2" and press Enter. Option set: drop call when
DTR low.
Type "AT&C1" and press Enter. Option set: data carrier
detect follow call.
Type "ATS0=1" and press Enter. Option set: Auto Answer.
1 2 3
L R L
L R L
D D D
D
D D
U D U
on on
Bit Number
4 5 6
R R R
L L L
D U U
D D U
U D
U
Data Adapters 3-73
7 8
L L
L L
D D
D D
D
D