Spm Main Menu Options - AT&T MERLIN LEGEND Installation & Maintenance Manual

Programming Procedures

SPM Main Menu Options

Table 4-1 SPM Main Menu Options
Sys Program
Backup
Boards
Print-Opts
Maint Mode
Restore
4-4 System Programming
Enter system programming and
configure the system as shown on the
planning forms for the system.
Save a backup copy of the system's
programming either on a floppy diskette
or on the hard disk.
Determine which modules (port boards)
are in each slot of the CU.
Set up the options for the printer used for
Station Message Detail Recording
(SMDR) and connected to the SMDR
port. See "Installation" chapter for details.
The AT&T systems technician or
authorized dealer uses this function for
maintenance tests that ensure the
hardware and software of the system are
operating correctly.
Restore the system's programming from
a floppy diskette or from a file stored on
the hard disk.