AT&T MERLIN LEGEND Installation & Maintenance Manual page 383

Programming Procedures
Step
3. Continued
If a DSS is attached
To specify that
operator receives call
types
To specify that
operator does not
receive call type
4. If a DSS is not attached
to system programming
console or if programming port, or # +
with SPM, identify
operator position to
program
5. To specify that operator
position receives the call
type
To prevent operator
number from receiving the
call type
Console
Press DSS
button for each
operator
position to turn
red LED on.
Go to step 6
Press DSS
button for each
operator
position to
make red LED
flash.
Go to step 6
Dial extension,
+ slot and
logical ID
or
Dial 0 for
initiating
operator
Enter
Delete
Optional Operator Features 4-141
PC
Type extension,
+ slot and
port, or # +
logical ID
or
Type 0 for
initiating
operator
F10
F 8